- FULFILLS THE REQUIREMENTS OF NON-ASPHALTIC TACKING EMULSIONS
- CONTAINS POLYACRYLAMIDE, COPOLYMERS AND HYDRO-COLLOID POLYMERS
- UNIVERSITY PROVEN TO CONTROL EROSION WITHOUT CURING
 Works with no curing time!
University studies and field trials have shown the effective reduction of soil erosion and water run-off directly after hydroseeding. Also improves water-retention of all types of hydraulic mulch.
DIRECTIONS
Once your hydroseeder is 1/3 full of water, add Tacking Agent 3, seeds, fibre mulch and fertilizer to the slurry mix. Observe the manufacturer's filling instructions.
STRAW BINDING
Very effective in straw binding, increases bond and duration of the tackifier by combining it with cellulose fibre mulch.
DUST PROTECTION
Can be applied for dust protection in a ratio of 5 kg per 1,000 sqm.
PHYSICAL PROPERTIES
|
|
| ph Range |
7,0 +-1 |
| Viscosity (Saybolt) |
197 CPS +/-20 |
| Surface tension |
63,9 Dyn/cm |
| Specific gravity |
0,7281 |
SEDIMENTATION PROTECTION
Reduction of soil erosion and water run-off directly after hydroseeding.
EROSION PROTECTION
Proven in university studies to aid in erosion protection directly after hydroseeding with no curing time. By combining FiberLock or FiberMax with Tacking Agent 3 you will get the advantages of both systems - excellent mechanical and chemical bonding. Contains dye to improve appearance.
| APPLICATION RATE |
|
| Fibre mulch bond |
|
| Gradient 4:1 bis 3:1 |
3.5 kg for 3,000 litres of water for 1,500 – 2,000 sqm |
| Gradient > 2:1 |
7.0 kg for 3,000 litres of water for 1,500 – 2,000 sqm |
PACKAGING SIZE
Bags of 3.64 kg; 4 bags per box; 60 boxes per pallet (120 cm x 120 cm)
|
scheier_tacking_agent3_d.pdf